Dodge38.co.uk

The chassis took a lot of time to get right but its good too go now.We are going too box in  the chassis rail to help with the look.We have too remove the gearbox cross member to fit the gearbox  Updates as we go  The old chassis is totally striped of the gearbox cross member. So we can place the eng/ gearbox  in the right place .The chassis is now  ready to weld up" all old bolt holes we do not need to use.This is so there is a better look to the out side of the chassis rails.

 With the modified front chassis rails we're still calculating the final ride height. Having done a mock up of the front end we have some figures and a look we're aiming for just got to do some final mock ups to prove it's all going as planned before we move on

 This card was in the truck in the roof space. Not the most reliable van on the road in its day then.i done some home work and the works is now a building site

the chassis  is now going too be but to gether so we can mok up and see were we are with the build all looks good and in line hues line i do not no. we need to see at least 23 inchs at the front or the motor is not going to fit were its needed .then we have probs .it wil be good to see the motor in a hole then we can take loads of points of reference .  12/12/08 the chassis is nearly done started to cut hole in the fill in plates to bolt the sumb frame the mounts are done now  soon we can weld all day  on the chassis to box in wa ha ..all so the rear axle is lay in place